All Contents in English,
Battery Bimonthly ( Dianchi in Chinese)
MAIN CONTENTS
2017, Vol.47
Battery Bimonthly ( Dianchi in Chinese)
Tel: +86-731-85141901 Fax: +86-731-85427570 E-mail:
batterie@yeah.net
Editor-in-Chief:
Luo Qiuzhen Editor: Li
Sheng
All Contents in English,
Battery Bimonthly ( Dianchi in Chinese)
Vol.47, Number 1(Serial No.243),
Feb., 2017
Research of Li-B alloy as cathode material of Li/SOCl2
battery |
WEI Jun-hua et al |
(4) |
Rate capacity prediction for Li-ion battery using Peukert
law |
ZHANG Ya-kun et al |
(8) |
Effect of sodium sources on performance of P2-Na2/3Ni1/3Mn2/3O2 |
CHEN Sen et al |
(12) |
Preparation and electrochemical performance of V2O5
foaming material |
LI Ning et al |
(16) |
Performance of graphite/LiFePO4 Li-ion battery
after high temperature storage |
CHANG Li-juan et al |
(20) |
Nail penetration test for lithium iron phosphate power
Li-ion battery |
JIN Biao et al |
(23) |
Forecast method of corrosion behavior on aluminum
laminated film of Li-ion battery |
LIU Ya-ming et al |
(27) |
Regulating the gelling time of colloidal electrolyte |
SUN Xiao-xiang et al |
(31) |
Effect of ethylene glycol bis(propionitrile) ether on
high-voltage Li-ion battery |
HONG Kun-guang et al |
(35) |
Effect of aluminum foil coating carbon on performance of
LiFePO4/C battery |
MA Shou-long et al |
(39) |
Thermal performance of electric vehicle battery group |
CUI Zhan-ping et al |
(43) |
Brief analysis of safety protection in battery testing
laboratory |
ZHU Xia-yu et al |
(46) |
Research progress in anode catalyst for direct ethylene
glycol fuel cell |
ZHAO Ya-fei et al |
(48) |
Research progress in recycling of spent power Li-ion
battery |
LI Xiao-xiao et al |
(52) |
Research progress in the preparation of nickel hydroxide
material |
LV Xiang et al |
(56) |
Research progress in vanadium pentoxide materials for
supercapacitors |
WAN Hui et al |
(60) |
Instructions for authors |
(64) |
News in brief |
(7,11,19,30,34,51,55,63) |
Vol.47, Number
2(Serial No.244),
Apr., 2017
Electrochemical performance of Nb doped TiO2
synthesized by sol-gel method |
ZHANG Song-tong et al |
(65) |
Influence of temperature and depth of discharge on ohmic
internal resistance of sodium-sulfur battery |
BAO Jian-ming et al |
(69) |
Effect of H3PO4
concentration and temperature on Pt/C catalyzing ORR |
CHENG Xing et al |
(72) |
Electrocatalytic activity of nano-LaMnO3
prepared via sol-gel method |
HE Wei et al |
(76) |
Effect of LiDFOB on cycle stability of LiCoO2
Li-ion battery |
LIAO Hong-ying et al |
(80) |
Modeling of LiNi0.5Mn1.5O4
electrodes based on variable solid-state diffusivity |
LV Tao-lin et al |
(84) |
Performance of ionic liquid based composite electrolyte
for lithium-air battery |
XIAO Yao et al |
(90) |
Improving the low-temperature charging performance of
Li-ion battery |
XU Han-liang et al |
(93) |
Application of zinc oxide in MH/Ni power battery |
JIANG Zhi-Jun et al |
(97) |
Development of polymer Li-ion battery used for unmanned
aerial vehicle |
CAO Ming-jin et al |
(101) |
Study on the acid leaching of ternary anode materials in
spent Li-ion battery |
ZHU Xian-feng |
(105) |
Intelligent manufacturing spotlight of alkaline Zn/MnO2
battery in China |
ZHU Xiao-ming |
(109) |
Research progress in ternary cathode materials LiNi1-x-yCoxAlyO2 |
WANG Yi-fei et al |
(112) |
Research progress in fluorine containing additives for
Li-ion battery electrolyte |
SHAO Jun-hua et al |
(116) |
Research status quo of anode materials for sodium ion
battery |
LI Fan-qun et al |
(120) |
Progress in the container formation technique of lead
acid battery |
ZHANG Feng-bo et al |
(123) |
Instructions for authors |
(127) |
News in brief |
(68,71,75,89,100,104,111,115,119) |
Vol.47, Number
2(Serial No.244),
Apr., 2017
IATA 58th Edition and lithium battery transportation
rules requirement in 2017 |
LI Ming |
(129) |
Preparing Li7La3Zr2O12
solid electrolyte by cold isostatic pressing method |
ZHAO Peng-cheng et al |
(133) |
Forecasting the driving range of electric vehicle based
on the SOE of battery |
LIN Shi-li et al |
(137) |
Effect of metal powder additives on performance of
cathode in Ni-Zn battery |
LV Xiang et al |
(140) |
Simulation of Ni-MH battery based on optimized Thevenin
model |
XU Ke-zhen et al |
(144) |
Study on suppressing gas evolution of alkaline Zn/MnO2
battery by polyethylene glycol |
WANG Kang et al |
(148) |
Effect of Mg doping on electrochemical performance of LiNi0.6Co0.15Mn0.25O2 |
DU Xing-jiao et al |
(152) |
Effects of MnO2
doping on performance of lithium/fluorinated carbon battery |
ZHANG Hong-mei et al |
(156) |
Preparation and performance of high voltage LiCoO2
for unmanned aerial vehicle |
PANG Pei-pei et al |
(160) |
Improving elevated temperature performance of LiNi0.6Co0.2Mn0.2O2
battery by lithium difluorophosphate |
LI Xue-feng et al |
(164) |
Effects of binders on swelling of anode for Li-ion
battery |
HE Yu-yu et al |
(169) |
Development and design of assembling machine for current
collector of LR61 battery |
CHEN Hang-jian |
(173) |
Results quality control and analysis in battery testing
laboratory |
RU Kun-lin et al |
(176) |
Application of graphene-supported Pt-based catalysts in
fuel cell |
GAO Hai-li et al |
(180) |
Development of V2O5
nanostructure materials prepared by hydrothermal method |
CHENG Hao et al |
(184) |
Research progress in Li-MnO2
primary battery |
ZHAO Hui-hui et al |
(188) |
Instructions for authors |
(191) |
News in brief |
(136,143,147,151,159,163,172,175,187) |
|